Cisco Catalyst 9130 Series Access Point Chennai, Hyderabad

Cisco Catalyst 9130 Series Access Point

• Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT
• Cisco Flexible Radio Assignment and Cisco CleanAir Technology
• Internal and external antenna
• WiFi 6 certified
• Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later
• Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
• Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later
• Cisco IOS XE Software Release 17.1.1 s or later
• Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
• Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
• 802.11n version 2.0 (and related) capabilities
• 4x4 MIMO with four spatial streams
• Maximal Ratio Combining (MRC)
• 802.11n and 802.11a/g
• 20- and 40 MHz channels
• PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
• Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
• 802.11 Dynamic Frequency Selection (DFS)
• Cyclic Shift Diversity (CSD) support
• 802.11ac
• 8x8 downlink MU-MIMO with eight spatial streams
• MRC
• 802.11ac beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• CSD support
• WPA3 support
• 802.11ax
• 8x8 uplink/downlink MU-MIMO with eight spatial streams
• Uplink/downlink OFDMA
• TWT
• BSS coloring
• MRC
• 802.11ax beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• CSD support
• WPA3 support
• System memory: 2048 MB DRAM, 1024 MB flash
• Interfaces
• 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
• Management console port (RJ-45)
• USB 2.0 at 4.5W (enabled via future software)
• Dimensions (W x L x H)
• Access point (without mounting brackets):
• C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
• C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
• Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg)
• Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg)
• Warranty: Limited lifetime hardware warranty